Totalboat Marine Epoxy Fairing Compound for Fiberglass, Wood, Aluminum and Steel (2 Quart Kit)

Don't go to the boatyard the next time you get a dent or ding in your boat - instead, fix it yourself with TotalBoat TotalFair epoxy fairing compound. This two-part premium marine epoxy putty is an ideal lightweight solution for fairing, filling, and shaping, making it the perfect total boat fairing compound for repairs all over your vessel.

The strong bonding and high tolerance for flexing without cracking of TotalFair make it perfect for use on hulls, decks, keels, topsides, and more. It's also great for fixing dings and dents on your car, motorcycle, or RV. This waterproof marine fairing compound can be used above or below the waterline on fiberglass, aluminum, steel, wood, and cast iron.

TotalFair has a simple 1 to 1 mix ratio and changes to a green color when the blue and yellow components are mixed for 3-5 minutes. Its thick, creamy consistency makes this fiberglass fairing compound easy to spread, and helps it hold its shape on vertical and overhead surfaces. When fairing a large gouge, a 6 to 1 width to depth ratio per application is recommended. For deep/narrow areas that exceed 6 to 1, you'll need to apply TotalFair in stages, building depth with each application.

At 80°F, TotalFair is ready to sand in just 3 hours to a smooth, pinhole-free surface. Protective gloves should be worn when mixing, and a proper respirator used when sanding the cured TotalFair. Do not apply gelcoat directly on the cured TotalFair, as the gelcoat will not cure properly. Instead, apply TotalBoat 2-Part Epoxy Primer or TotalBoat TotalProtect Barrier Coat before applying gelcoat.

Compared to other two-part epoxy putty products such as Interlux Watertite Epoxy Filler, Awlgrip Awlfair, System Three Quikfair, 3M premium marine filler, Pro Set, 4100, and Pettit EZ Fair, TotalFair epoxy filler is stronger and more waterproof than vinylester or polyester fairing compounds.

Store TotalFair at 60-90°F. All TotalBoat products are developed for boaters, by boaters, to provide great value and great results. 100% made in the USA.

In summary, TotalBoat TotalFair is a HIGH-STRENGTH, LIGHTWEIGHT TWO-PART EPOXY FILLER that smooths out rough spots and fills voids, making it ideal for repairing dents, holes, and gouges on boats, canoes, and other watercraft. It also works great for home, RV, and auto repairs, providing a SUPER SMOOTH FINISH for PERMANENT, WATERPROOF REPAIRS. The NEW IMPROVED FORMULA is EASY TO MIX AND APPLY, with a foolproof 1 to 1 ratio, and cures FAST, making it EASY TO SAND AND PAINT.

product information: