Automotive Marine Boat Trailer Wire Connectors

The heat shrink connectors offer excellent wire shrinking, sealing, and wetting capabilities. You can pull the connection hard, and it will not separate unless you fail to let it cool before tugging. These connectors are perfect for DIY projects on your car, bike, and various home applications.

Using the connectors is straightforward: 1. Peel the wire jacket off. 2. Insert the wire into the connector. 3. Tighten the wires and position them at the center of the tube. 4. Heat the shrinkable tube using a lighter or a heat gun. Start by waving the flame back and forth at the middle section until the solder melts. Then, let it cool for about 10 seconds. 5. Once the center area is soldered and cooled, you can proceed to seal the two sides. If you don't wait for the solder to cool in the middle, it will remain pliable and soft, causing the wire to shift while sealing the edges.

The connectors feature the following specifications: Insulation: PE Plating: Tin Terminal Body: Copper Working Temperature: -55°C to 125°C Start Shrinking Temperature: 80°C Tin Start Melting Temperature: 138°C Tin Complete Melting Temperature: 160°C Shrink Temperature: >160°C Protection Class: IP67

The connectors are available in the following size: Orange: AWG 8, Cable Cross-section 10 mm², Length: 30 mm/1.18 inch, Interface Diameter: 7.3 mm The package includes 60 heat shrink butt connectors.

The all-in-one step solder and seal process makes these connectors easy to use. Simply insert the stripped wires into the solder sleeve and heat it with a hot air gun or lighter to complete the connection. There's no need for crimp tools or a soldering machine.

When heating the connectors, start at both ends until they are clear, then heat the solder in the middle. Allow the entire assembly to cool before moving or tugging on it.

The IP67 waterproof capability makes these connectors popular in the automotive and marine industries, as well as for various DIY projects, such as vehicle, home, or scientific wiring tasks. The solder ring melts uniformly every time, resulting in a consistent, expert-looking solder weld. To achieve this, ensure to move the lighter back and forth, never lingering in one spot for more than a second, just like sealing any shrink tubing.

In summary, these heat shrink connectors offer a reliable and easy-to-use solution for your wiring needs, with their excellent shrinking, sealing, and wetting capabilities, as well as their IP67 waterproof protection. They are a versatile choice for a wide range of DIY projects.

product information: